========================================================================= INFO-ATARI16 Digest Mon, 29 Jan 90 Volume 90 : Issue 114 Today's Topics: Address for archives at panarthea. archive server for terminator drawings -> pic, laserjet, postscript?? Need IBM Format Program for my ST SF314 Shareware Policy. (2 msgs) Technical Documentation ( Yes, I have an STE ---------------------------------------------------------------------- Date: 29 Jan 90 06:51:43 GMT From: maytag!water!ljdickey@iuvax.cs.indiana.edu (L.J.Dickey) Subject: Address for archives at panarthea. Message-ID: <2936@water.waterloo.edu> There were several messages lately about folks being unable to reach the archive server at panarthea. Yesterday, I tried to request something, and found that an address I had been using was not working, but that a variant did work. Maybe I missed something along the way, but until now, I had had no trouble with the old address. This may reflect a change in the mailer at sun.com, but who knows? archive-server%panarthea@sun.com # old or broken archive-server%panarthea.ebay@sun.com # this worked for me Just thought you might want to know. Thanks, Steven, for keeping the archive! -- L. J. Dickey, Faculty of Mathematics, University of Waterloo. ljdickey@water.UWaterloo.ca ljdickey@water.BITNET ljdickey@water.UUCP ..!uunet!watmath!water!ljdickey ljdickey@water.waterloo.edu ------------------------------ Date: 29 Jan 90 06:44:26 GMT From: jarthur!uci-ics!gateway@uunet.uu.net (Wayne Ngai) Subject: archive server for terminator Message-ID: <25C3E64A.20152@paris.ics.uci.edu> Could someone please tell me if there are archive server to terminator site? If so, how do I get to it?? How do I talk to it??? wayne ------------------------------ Date: 29 Jan 90 03:50:30 GMT From: van-bc!ubc-cs!fornax!chapman@ucbvax.Berkeley.EDU (John Chapman) Subject: drawings -> pic, laserjet, postscript?? Message-ID: <249@fornax.UUCP> Does anyone have, or know of, a program which will let you create (relatively) simple line drawings and which will produce as output (in order of preference) 1. PIC commands 2. an HP LaserJet 3. Postscript I have a fairly serious need for this and appreciate any pointers people can give; email replies preferred; I will summarize to the net if there is interest. Thanks, john chapman@cs.sfu.ca uunet!van-bc!syssol!john ------------------------------ Date: 29 Jan 90 03:51:55 GMT From: eagle!ncastellano@ucbvax.Berkeley.EDU Subject: Need IBM Format Program for my ST SF314 Message-ID: <6049@eagle.wesleyan.edu> In article <1405@ariel.unm.edu>, seattle@hydra.unm.edu (David G. Adams) writes: > Subject just about says it all. I need to format some disks in IBM format, > so they'll read on a friend's PC. I know, the simple solution is to use > his PC, but he lives 3 states over... I know TOS 1.4 has this feature > built in, but I don't have 1.4. I have an '86 model 520ST. > > Thanks in advance. > > Dave > > /|\ | seattle@hydra.unm.edu <> Dadams10@GEnie <> David G. Adams \ > < |/\ | LotE | "Modern love is automatic" - A Flock of Seagulls | > \| | Live it! | Don't bug the University 'bout nuthin' I've said. / The standard ST format is the same as the IBM format. The difference is the boot sector--IBM's don't recognize the ST boot sector, but ST's recoginize the DOS boot sector. So you format the disk, then write an MS-DOS boot sector onto it. DC Formatter, a PD format program which should be in the Usenet archives somewhere, can do this. Make sure you don't change the format parameters before writing the boot sector or you will get the wrong boot sector. Use double sided, 80 tracks, 9 sectors/track, normal interleave (as opposed to Fast interleave) and write the boot sector, and you should have no problem reading it on the ST or IBM. -- _=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_ Mathematics is the subject in which we never know what we are talking about, nor whether what we are saying is true. -Bertrand Russell _-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_ Nicholas Steven Castellano | Box 4127 Wesleyan Station | Disclaimer: I am ncastellano@eagle.wesleyan.edu | Middletown CT 06457 | irresponsible. _=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_=_-_ ------------------------------ Date: 29 Jan 90 03:28:48 GMT From: swrinde!cs.utexas.edu!asuvax!mcdphx!mcdchg!chinet!saj@ucsd.edu (Stephen Jacobs) Subject: Shareware Policy. Message-ID: <1990Jan29.032848.2760@chinet.chi.il.us> This is replying to a note including suggestions to make shareware better. I'm convinced that everyone who should pay for shareware means to pay for it. But it's always hard to send money into the unknown: even tiny amounts of money. Come to that, even ANYTHING. My personal reference is the port of umoria to the ST--I asked people to send me picture postcards for my trouble; perhaps 10 people have. And there's also my own feeling: I use a piece of IBM-world shareware that's about 6 years old. I can't believe there's still someone at that address. I think the whole idea of shareware could use re-examination. If I write a program, and impressing people with what nice programs I write is a big motivation, then why should the admiring fans send me money? My payoff is in their using it, and I need them more than they need me. On the other hand, if AFTER impressing people with a nice program I have some goodie to sell, that's a different matter. Like I'm finally about ready to admit that there's no market for something I wrote. If it comes to that, I'll give it away, but if someone wants to know how the neat effects work, the source will be for sale. There are plenty of goodies to sell. Most shareware-type stuff doesn't need support, but some does (who'd want to get deep into MICRORTX without making sure David Beckemeyer would answer his questions?). An awful lot of shareware utilities are buggy at first: if something ALMOST works well, the first upgrade might still be shareware, but later ones might only go to contributors. The key isn't so much the need for the support, or upgrade, or source; it's the contact with someone. It's less like sending money into the void. And of course the need for the author to RESPOND makes it a lot more like work. Which is probably a key to something important. One of the points in the GNU manifesto is worth thinking about: even if programs are freely transmitted, programmers still have something to sell. Steve J. ------------------------------ Date: 29 Jan 90 07:39:50 GMT From: mcsun!sunic!lth.se!newsuser@uunet.uu.net (Ralph Haglund) Subject: Shareware Policy. Message-ID: <1990Jan29.073950.24385@lth.se> I don't see the problem in sending money to the US. For smaller amounts, put a few dollar bills in a regular envelope - the chance of loosing them in transport is small. |-------------------------------------------------------------| | Want to talk to me? Try: | | QRALPH@SELDC51 || QRALPH@SELDC52 || qralph@dna.lth.se | | My name? In official Sweden it is: 4.901.185.654 (secret) | | Anywhere else: Ralph Haglund | | Disclaimer: If it works, it's out of date. | |_____________________________________________________________| ------------------------------ Date: 29 Jan 90 05:04:58 GMT From: dartvax!eleazar.dartmouth.edu!squibby@CS.BU.EDU (Clark L. Breyman) Subject: Technical Documentation ( Message-ID: <18892@dartvax.Dartmouth.EDU> In article <90012818034046@masnet.uucp> ron.sharp@canremote.uucp (RON SHARP) writes: >My flash of anger was sparked by the policy that registered developers >are not allowed to devulge information. (Or answer techical questions >on this network, I presume.) So that any non-Atari information is >"discovered" by hacking around. I really doubt this cuts down on >misinformation. ... A point of buiness in the information age (to use a cliche) is that information is a self-standing commodity independant of its medium that can be traded. The unique facet of information is that it is possible to sell one's information and keep it after the transaction. If this is prohibited in the original agreement prior to the transfer of information, then it is criminal. Examples of this are software piracy and intelectual piracy(plagiarism). But why should software be unique? I understand that the FSF folks do not beliece in private ownership of information, but can a corporation producing information products independant of public sponsorship subscibe to such a philosophy and stay in buisness? Doubtfull. Before we wind up in a political discussion on the ethics of private ownership in general, I wish to make two assertions: 1) If an information product adds value to an enterprise, then that information product has real value and the source of the information has a right to reasonable compensation for that information. An example of this would be a royalty paid to atari from Abacus for the right to publish dissassembled XBIOS, BIOS and GEM listings. 2) Atari is very strict about control of their information probably to the detrement of their product. Their choice, our loss. The non-disclosure agreement is neither novel nor rare in information buisness. It's the meat of all JOA's. If we as a community want better information at a cheaper price, then it is OUR responsibility, not theirs, to convince Atari that they should do as we wish. Given, information ownership is a tricky subject, but it is neccessary for those dreaming of careers in information management (including academic jobs even on non-technical faculty) for us to have an under- standing of the economic foundations of our future livelihood. Sinc, Clark Breyman (presently a student of some sort) ------------------------------ Date: Sun, 28 Jan 90 23:42:00 EST From: Greg Csullog <01659%AECLCR.bitnet@ugw.utcs.utoronto.ca> Subject: Yes, I have an STE Message-ID: <90Jan28.234400est.59037@ugw.utcs.utoronto.ca> To those who asked if I actually have an STE, the answer is yes. In fact, I I just wrapped up a review for a U.S. based magazine, Current Notes. And, yes, I really do want to know about the STE and multisyncs! ------------------------------ End of INFO-ATARI16 Digest V90 Issue #114 *****************************************